SAE J1127 Low Voltage Battery Cable

作者:标准资料网 时间:2024-05-10 05:19:05   浏览:8649   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE J1127
Title:Low Voltage Battery Cable
Issuing Committee:Cable Standards Committee
Scope: This standard covers low voltage battery cable intended for use at a nominal system voltage of 60 V DC (25 V AC) or lessin surface vehicle electrical systems. The tests are intended to qualify cables for normal applications with limitedexposure to fluids and physical abuse.
Rationale: This standard covers low voltage battery cable intended for use at a nominal system voltage of 60 V DC (25 V AC) or lessin surface vehicle electrical systems. The tests are intended to qualify cables for normal applications with limitedexposure to fluids and physical abuse.
下载地址: 点击此处下载
Product Code:SAE J2045
Title:Performance Requirements for Fuel System Tubing Assemblies
Issuing Committee:Fuel Systems Standards Committee
Scope: This SAE Standard encompasses the recommended minimum requirements for non-metallic tubing and/or combinations of metallic tubing to non-metallic tubing assemblies manufactured as a liquid- and/or vapor-carrying systems designed for use in gasoline, alcohol blends with gasoline, or diesel fuel systems. This SAE Standard is intended to cover tubing assemblies for any portion of a fuel system which operates above 聳40 掳C (聳40 掳F) and below 115 掳C (239 掳F), and up to a maximum working gage pressure of 690 kPa (100 psi). The peak intermittent temperature is 115 掳C (239 掳F). For long-term continuous usage, the temperature shall not exceed 90 掳C (194 掳F). It should be noted that temperature extremes can affect assemblies in various manners and every effort must be made to determine the operating temperature to which a specific fuel line assembly will be exposed, and design accordingly. The applicable SAE standards should be referenced when designing liquid-carrying and/or vapor-carrying systems which are described in this document.Wherever possible or unless stated otherwise, systems tested to this document shall be in the final design intent configuration.
Rationale: This SAE Standard encompasses the recommended minimum requirements for non-metallic tubing and/or combinations of metallic tubing to non-metallic tubing assemblies manufactured as a liquid- and/or vapor-carrying systems designed for use in gasoline, alcohol blends with gasoline, or diesel fuel systems. This SAE Standard is intended to cover tubing assemblies for any portion of a fuel system which operates above 聳40 掳C (聳40 掳F) and below 115 掳C (239 掳F), and up to a maximum working gage pressure of 690 kPa (100 psi). The peak intermittent temperature is 115 掳C (239 掳F). For long-term continuous usage, the temperature shall not exceed 90 掳C (194 掳F). It should be noted that temperature extremes can affect assemblies in various manners and every effort must be made to determine the operating temperature to which a specific fuel line assembly will be exposed, and design accordingly. The applicable SAE standards should be referenced when designing liquid-carrying and/or vapor-carrying systems which are described in this document.Wherever possible or unless stated otherwise, systems tested to this document shall be in the final design intent configuration.【英文标准名称】:Motion-PictureFilm(70-mm)-Perforated65-mm,KS-1870(SMPTE)
【原文标准名称】:电影胶片(70mm).打孔成65mmKS-1870的胶片
【标准号】:ANSI119-1988
【标准状态】:作废
【国别】:美国
【发布日期】:1988
【实施或试行日期】:
【发布单位】:美国国家标准学会(ANSI)
【起草单位】:ANSI
【标准类型】:()
【标准水平】:()
【中文主题词】:电影胶片
【英文主题词】:motion-picturefilm
【摘要】:
【中国标准分类号】:A15
【国际标准分类号】:37_060_20
【页数】:2P;A4
【正文语种】:英语